OASIS XML Localisation Interchange File Format (XLIFF) TC

 View Only
Expand all | Collapse all

RE: [xliff] Cannot add itsm:domains to unit or mrk

  • 1.  RE: [xliff] Cannot add itsm:domains to unit or mrk

    Posted 11-06-2018 18:48




    Hi Phil,
     
    Sorry for the delay answering: it seems days are about 12h too short
    I ll have to look at this. The issue maybe support for XLIFF 2.0 vs 2.1: I don t think the Okapi prototype for 2.1 was ever finished.
     
    -ys
     


    From: xliff@lists.oasis-open.org [mailto:xliff@lists.oasis-open.org]
    On Behalf Of Phil Ritchie
    Sent: Tuesday, November 6, 2018 8:15 AM
    To: David Filip <david.filip@adaptcentre.ie>
    Cc: XLIFF Main List <xliff@lists.oasis-open.org>
    Subject: RE: [xliff] Cannot add itsm:domains to unit or mrk


     
     
    David
     
    See attached xlf. It validates fine locally using XMLSpy but Lynx and Ocelot (which uses Okapi underneath) both give Attribute '{urn:oasis:names:tc:xliff:itsm:2.1}domains'
    is not allowed in 'mrk'. Error.
     
    Phil
     
     

     












    Phil Ritchie








    Chief Technology Officer


       


    Vistatec
















    Vistatec House, 700 South Circular Road,
    Kilmainham, Dublin 8, Ireland.








    Tel: 


    +353 1 416 8000


       


    Direct: 


    +353 1 416 8024












    Email: 


    phil.ritchie@vistatec.com












    www.vistatec.com


       


    ISO 9001


       


    ISO 13485


       


    ISO 17100


       


    ISO 27001

















    Think Global































    Vistatec Ltd. Registered in Ireland 268483. Registered Office, Vistatec House, 700, South Circular Road, Kilmainham. Dublin 8. Ireland.
    The information contained in this message, including any accompanying documents, is confidential and is intended only for the addressee(s).

    The unauthorized use, disclosure, copying, or alteration of this message is strictly forbidden.

    If you have received this message in error please notify the sender immediately.







     

    From: David Filip < david.filip@adaptcentre.ie >

    Sent: Tuesday 6 November 2018 13:17
    To: Phil Ritchie < phil.ritchie@vistatec.com >
    Cc: XLIFF Main List < xliff@lists.oasis-open.org >
    Subject: Re: [xliff] Cannot add itsm:domains to unit or mrk
     

    Hi Phil,

     


    can u please clarify which part of the validation platform or which validation service gives you those errors?


    I just quickly checked that its:domains is allowed on both unit and mrk in the spec and the core xsd has the wild card other.. on both unit and mrk (and sm) did you declare the itsm namespace?


     


    Did it validate OK on other elements?


     


    Cheers and thanks


    dF




















    Dr. David Filip

    ===========


    Convenor, JTC 1/SC 42/WG 3 Trustworthiness of AI National mirror chair, NSAI TC 02/SC 18 AI Head of the Irish national delegation, ISO/IEC JTC 1/SC 42 AI Chair & Editor, OASIS XLIFF OMOS TC  Secretary & Lead Editor,
    OASIS XLIFF TC NSAI expert to ISO/IEC JTC 1/SC 38 Cloud Computing, ISO TC 37/SC 3 Terminology management, SC 4 Language resources, SC 5 Language technology


    Moravia Research Fellow


    ADAPT Centre


    KDEG, Trinity College Dublin


    Mobile: +420-777-218-122


     

















     


     


    On Mon, Nov 5, 2018 at 2:40 PM Phil Ritchie < phil.ritchie@vistatec.com > wrote:



     

    I keep getting validation errors when trying to add itsm:domains to <unit /> and <mrk /> elements. Any insight appreciated.


     












    Phil Ritchie








    Chief Technology Officer


       


    Vistatec
















    Vistatec House, 700 South Circular Road,
    Kilmainham, Dublin 8, Ireland.








    Tel: 


    +353 1 416 8000


       


    Direct: 


    +353 1 416 8024












    Email: 


    phil.ritchie@vistatec.com












    www.vistatec.com


       


    ISO 9001


       


    ISO 13485


       


    ISO 17100


       


    ISO 27001

















    Think Global






























    Vistatec Ltd. Registered in Ireland 268483. Registered Office, Vistatec House, 700, South Circular Road, Kilmainham.
    Dublin 8. Ireland.
    The information contained in this message, including any accompanying documents, is confidential and is intended only for the addressee(s).

    The unauthorized use, disclosure, copying, or alteration of this message is strictly forbidden.

    If you have received this message in error please notify the sender immediately.




     

     



     






  • 2.  RE: [xliff] Cannot add itsm:domains to unit or mrk

    Posted 11-06-2018 18:52
    Yves   Ha, Ha, I know the problem well!   This item is * not * gating anything so it can go through the normal Okapi issue reporting channels and process. Thanks for responding.   Phil   Phil Ritchie ? Chief Technology Officer     Vistatec Vistatec House, 700 South Circular Road, Kilmainham, Dublin 8, Ireland. Tel:  +353 1 416 8000     Direct:  +353 1 416 8024 Email:  phil.ritchie@vistatec.com www.vistatec.com     ISO 9001     ISO 13485     ISO 17100     ISO 27001 Think Global Vistatec Ltd. Registered in Ireland 268483. Registered Office, Vistatec House, 700, South Circular Road, Kilmainham. Dublin 8. Ireland. The information contained in this message, including any accompanying documents, is confidential and is intended only for the addressee(s). The unauthorized use, disclosure, copying, or alteration of this message is strictly forbidden. If you have received this message in error please notify the sender immediately. From: Yves Savourel <yves.savourel@argosmultilingual.com> Sent: Tuesday 6 November 2018 18:47 To: Phil Ritchie <phil.ritchie@vistatec.com>; David Filip <david.filip@adaptcentre.ie> Cc: XLIFF Main List <xliff@lists.oasis-open.org> Subject: RE: [xliff] Cannot add itsm:domains to unit or mrk   Hi Phil,   Sorry for the delay answering: it seems days are about 12h too short I ll have to look at this. The issue maybe support for XLIFF 2.0 vs 2.1: I don t think the Okapi prototype for 2.1 was ever finished.   -ys   From: xliff@lists.oasis-open.org [ mailto:xliff@lists.oasis-open.org ] On Behalf Of Phil Ritchie Sent: Tuesday, November 6, 2018 8:15 AM To: David Filip < david.filip@adaptcentre.ie > Cc: XLIFF Main List < xliff@lists.oasis-open.org > Subject: RE: [xliff] Cannot add itsm:domains to unit or mrk     David   See attached xlf. It validates fine locally using XMLSpy but Lynx and Ocelot (which uses Okapi underneath) both give Attribute '{urn:oasis:names:tc:xliff:itsm:2.1}domains' is not allowed in 'mrk'. Error.   Phil       Phil Ritchie Chief Technology Officer     Vistatec Vistatec House, 700 South Circular Road, Kilmainham, Dublin 8, Ireland. Tel:  +353 1 416 8000     Direct:  +353 1 416 8024 Email:  phil.ritchie@vistatec.com www.vistatec.com     ISO 9001     ISO 13485     ISO 17100     ISO 27001 Think Global Vistatec Ltd. Registered in Ireland 268483. Registered Office, Vistatec House, 700, South Circular Road, Kilmainham. Dublin 8. Ireland. The information contained in this message, including any accompanying documents, is confidential and is intended only for the addressee(s). The unauthorized use, disclosure, copying, or alteration of this message is strictly forbidden. If you have received this message in error please notify the sender immediately.   From: David Filip < david.filip@adaptcentre.ie > Sent: Tuesday 6 November 2018 13:17 To: Phil Ritchie < phil.ritchie@vistatec.com > Cc: XLIFF Main List < xliff@lists.oasis-open.org > Subject: Re: [xliff] Cannot add itsm:domains to unit or mrk   Hi Phil,   can u please clarify which part of the validation platform or which validation service gives you those errors? I just quickly checked that its:domains is allowed on both unit and mrk in the spec and the core xsd has the wild card other.. on both unit and mrk (and sm) did you declare the itsm namespace?   Did it validate OK on other elements?   Cheers and thanks dF Dr. David Filip =========== Convenor, JTC 1/SC 42/WG 3 Trustworthiness of AI National mirror chair, NSAI TC 02/SC 18 AI Head of the Irish national delegation, ISO/IEC JTC 1/SC 42 AI Chair & Editor, OASIS XLIFF OMOS TC  Secretary & Lead Editor, OASIS XLIFF TC NSAI expert to ISO/IEC JTC 1/SC 38 Cloud Computing, ISO TC 37/SC 3 Terminology management, SC 4 Language resources, SC 5 Language technology Moravia Research Fellow ADAPT Centre KDEG, Trinity College Dublin Mobile: +420-777-218-122       On Mon, Nov 5, 2018 at 2:40 PM Phil Ritchie < phil.ritchie@vistatec.com > wrote:   I keep getting validation errors when trying to add itsm:domains to <unit /> and <mrk /> elements. Any insight appreciated.   Phil Ritchie Chief Technology Officer     Vistatec Vistatec House, 700 South Circular Road, Kilmainham, Dublin 8, Ireland. Tel:  +353 1 416 8000     Direct:  +353 1 416 8024 Email:  phil.ritchie@vistatec.com www.vistatec.com     ISO 9001     ISO 13485     ISO 17100     ISO 27001 Think Global Vistatec Ltd. Registered in Ireland 268483. Registered Office, Vistatec House, 700, South Circular Road, Kilmainham. Dublin 8. Ireland. The information contained in this message, including any accompanying documents, is confidential and is intended only for the addressee(s). The unauthorized use, disclosure, copying, or alteration of this message is strictly forbidden. If you have received this message in error please notify the sender immediately.