MHonArc v2.5.0b2 -->
ubl message
[Date Prev]
| [Thread Prev]
| [Thread Next]
| [Date Next]
--
[Date Index]
| [Thread Index]
| [List Home]
Subject: Re: [ubl] qDT spreadsheet
here it is back again (for Peter to check into the library).
we need to discuss this further... (Can Jon add it to the agenda and
also the PSC and TSC so we get this finalized this week?)
Firstly I discovered that we no longer use AcknowledgementResponseCode
(we have dropped it). So it has gone from the qDT spreadsheet.
Secondly , our models do not specify the use of a UBL code list for
AllowanceChargeReasonCode, ChipCode, Currency, Country, LineStatus,
Operator, PaymentMeans, SubstitutionStatus (we dont qualify the
general CodeType). Did we mean to disconnect these from our code
lists? To put this another way: we only qualify codes for Channel,
DocumentStatus, LongitudeDirection and LatitudeDirection. Seems a bit
sad after all that debate on code lists methodology ;-) I suspect we want to
think about updating the models to use more of the code lists we have
qualified.
Thirdly, i also think we should update the CodeListURI for all the
codes we
qualify in UBL 2.0 to have references to our genericcode files. So the
Currency and
Country codes,etc should not have a CodeListURI that is a foreign web
site - because it wont contain the genericode version (not yet
anyway... but maybe one
day). That is, we should provide genericode files for all qualified
data types that are codes.
Finally, I added the following qualified code types:
| PortCode |
The set of
code values for Trade and Transport Locations |
| PackagingTypeCode |
The set of
code values for Passengers, Types of Cargo, Packages and Packaging
Materials (with Complementary Codes for Package Names) |
| TransportationStatusCode |
The set of code values for Trade and Transport Status |
| TransportModeCode |
The set of
code values for modes of transport |
| UnitOfMeasureCode |
The set of
code values for Units of Measure Used in International Trade |
| ContainerSizeTypeCode |
The set of
code values for classifying series 1 freight containers based on
external dimensions and specifies the assoziated ratings and, where
appropriate, the minimum internal and door opening dimensions for
certain types of containers. |
I know UnitOfMeasureCode is in the ATG2 schema but we do use this as a
standalone BBIE for default measurements.
The good news is I have been able to find the values for most of these
from the UN/ECE web site
(http://www.unece.org/cefact/recommendations/rec_index.htm). However,
the ContainerSizeType code is not licensed for public distribution (and
to see it you have to buy it). I propose we leave it in the schema and
make a note in the genericode file that you need to get the values from
ISO.
stephen.green@systml.co.uk wrote:
Here is my part of the qDT spreadsheet stage 1.
I now hand it on to Tim to add Transport codes, etc
and maybe add or remove any procurement codes from
UBL 1.0 if we don't need them or need them.
A note while doing this: I didn't find any candidates
for the XSD 'fixed' attribute, just what I believe
to be appropraite for 'default' so maybe the rule
about fixed isn't needed - perhaps all we need is rule
for default.
I'd note Tony's observation from the Atlantic call that
'default' could be misused or cause problems since it
implies that the supplementary component attribute could
be omitted if it complied with the default. This might
be warned against in what we add for this to the spec
index file: the values should always be explicitly
included in the instance if they are required for some
reason (say a legal reason) since it can't always be
guaranteed that the exactly correct schemas will be
available when the instance document is read.
All the best
Steve
---------------------------------------------------------------------
To unsubscribe from this mail list, you must leave the OASIS TC that
generates this mail. You may a link to this group and all your TCs in OASIS
at:
https://www.oasis-open.org/apps/org/workgroup/portal/my_workgroups.php
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.1.385 / Virus Database: 268.5.0/325 - Release Date: 26/04/2006
--
regards
tim mcgrath
phone: +618 93352228
postal: po box 1289 fremantle western australia 6160
web: http://www.portcomm.com.au/tmcgrath
|
UBL-QualifiedDataTypes-2-timdraft28042006.xls
[Date Prev]
| [Thread Prev]
| [Thread Next]
| [Date Next]
--
[Date Index]
| [Thread Index]
| [List Home]